The 2005280170: 1.00 mm pitch sets the board footprint and the per-contact current ceiling — at 1 A the temperature rise stays within the LCP housing's UL94 V-0 rating. The 17 positions match a 17-conductor FPC with a 0.30 mm thickness, straight or tabbed end.
ZIF actuation and retention
Zero insertion force with a flip-lock actuator: the FPC slides in without force on the contacts, then the black nylon actuator flips down to clamp the cable. The beige LCP housing withstands lead-free soldering temperatures.
Contact interface and durability
In a set-and-forget application (display interconnect, sensor module) that is the lifetime of the assembly; this is not a connector for repeated field disconnect. Bottom-contact configuration means the FPC pads contact the lower beam — the cable inserts with the conductor side facing down. Straight or tabbed cable ends are accepted; the tabbed variant helps alignment during insertion.