Molex Nano-Fit 201444 plug housing, 6 circuits, 2.50mm pitch, dual-row, natural, glow wire compliant, crimp termination, free-hanging, latch holder.
| Parameter | Value |
|---|---|
| Series | Nano-Fit 201444 |
| Type | Male Pin |
| Mounting | Free Hanging (In-Line) |
| Connector type | Plug |
| Fastening type | Latch Holder |
| Operating temperature | -40°C ~ 105°C |
| Color | Natural |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Note | Contacts Not Included |
| Pitch | 0.098\" (2.50mm) |
| Package | Bulk |
| Features | Glow Wire Compliant |
| Row spacing | 0.098\" (2.50mm) |
| Rows | 2 |
| Contact termination | Crimp |
| Positions | 6 |
The housing is moulded in natural polyamide (PA66) and is glow wire compliant, making it suitable for appliance and HVAC equipment where IEC 60335-1 glow-wire testing applies. Contacts are not included — the buyer sources the matching male crimp terminals separately.
The dual-row 6-position layout gives three circuits per row.
The 2014442106 is a bare plug housing — contacts are not included. It accepts male crimp terminals from the Molex Nano-Fit terminal family. The correct terminal must be ordered separately to complete the assembly.