Molex Nano-Fit 201444 plug housing, 10 positions, 2.50mm pitch, dual-row, natural PA66, glow wire compliant, latch holder, free-hanging crimp termination.
| Parameter | Value |
|---|---|
| Series | Nano-Fit 201444 |
| Type | Male Pin |
| Mounting | Free Hanging (In-Line) |
| Connector type | Plug |
| Fastening type | Latch Holder |
| Operating temperature | -40°C ~ 105°C |
| Color | Natural |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Note | Contacts Not Included |
| Pitch | 0.098\" (2.50mm) |
| Package | Bulk |
| Features | Glow Wire Compliant |
| Row spacing | 0.098\" (2.50mm) |
| Rows | 2 |
| Contact termination | Crimp |
| Positions | 10 |
This is a crimp-termination housing: you insert the male crimp pins into the cavities, then mate the loaded plug to a Nano-Fit receptacle header on the board.
This housing is glow wire compliant. The PA66 material is formulated to resist ignition under a glow-wire test.
Submit an RFQ for your BOM quantity and lead time.
The pitch is 2.50mm (0.098") with matching 2.50mm row spacing — a square grid that aligns with the Nano-Fit header footprint.