Molex Squba 1.8 2042230002, plug housing, 2 positions, 1.80mm pitch, 1 row, free hanging, crimp termination, locking ramp, sealed, black PA nylon, -40°C to 105°C.
| Parameter | Value |
|---|---|
| Series | Squba 1.8, 204223 |
| Type | Male Pin |
| Mounting | Free Hanging (In-Line) |
| Connector type | Plug |
| Fastening type | Locking Ramp |
| Operating temperature | -40°C ~ 105°C |
| Color | Black |
| Insulation material | Polyamide (PA), Nylon |
| Note | Contacts Not Included |
| Pitch | 0.071\" (1.80mm) |
| Package | Bulk |
| Features | Sealed |
| Rows | 1 |
| Contact termination | Crimp |
| Positions | 2 |
To build a mated assembly, order the matching Squba 1.8 male crimp terminals separately.
The housing is listed as Sealed, meaning the interface and wire-entry seals are designed into the Squba 1.8 system — suitable for moisture-prone or washdown environments when mated with the corresponding receptacle and properly terminated.
The housing is molded from black polyamide (PA) nylon. It carries ROHS3 compliance.
The pitch is 0.071" (1.80 mm), which defines the footprint for the mating header and the wire-to-board spacing in the Squba 1.8 system.
This part is active and quoted to order against your BOM quantity.