Empty housing — order the terminals separately
The Molex 2064612400 is a 24-circuit, 2-row receptacle housing from the Micro-Fit+ 206461 series. It is a free-hanging (in-line) shell that accepts female socket crimp terminals — but the contacts are not included. If you are filling a BOM line for a complete connector, you need to add the matching crimp terminals as a separate line item; the housing alone will stall a harness build. The latch holder fastening type gives an audible click when mated — the primary retention for vibration-prone wire-to-board harnesses in automotive or industrial cabinets. The PA66 (Nylon 6/6) housing is rated -40°C to 105°C, so it lives comfortably underhood or inside an enclosure without a thermal derating headache.
Mating half and terminal compatibility
This receptacle housing mates with the corresponding Micro-Fit+ 3.00 mm pin header (male) — the latch holder on the housing locks onto the header's ramp for a vibration-resistant mate. The crimp terminals are the Micro-Fit+ female socket contacts, typically ordered as Molex 206461 series terminals (e.g., 2064610001 or similar gauge-specific variants). Confirm the wire gauge range for the terminal you select; the housing accepts whatever terminal the series specifies.