11-position 1.00 mm pitch receptacle — the housing that defines the wire harness side
The Molex 5013301100 is the 11-circuit receptacle half of the Pico-Clasp 501330 series, a 1.00 mm pitch wire-to-board interconnect system.
Contacts not included — the terminal decision is yours
The crimp termination method means the housing itself carries no current; the current path is through the terminal-to-header pin interface. For the harness builder, this means the tooling setup — a hand crimp tool for prototypes or a semi-auto press for volume — is a separate line item in the BOM.
White nylon housing, single row, locking ramp
The single-row layout with 11 positions gives a linear wire exit, which simplifies routing in tight enclosures compared to a dual-row layout. The free-hanging mount means no board footprint for this half; the header takes the PCB space.
The bulk packaging (not tape-and-reel) means it feeds best into a tray or bowl feeder for semi-automated assembly; if your line expects reel-fed housings, plan for a changeover step.