Molex DuraClik 502352 series, 5023520900, Board to Cable/Wire header, 9 positions, 2.00mm pitch, SMT right-angle, shrouded 4-wall, latch holder, tin-plated male pins, UL94 V-0 natural PA housing.
| Parameter | Value |
|---|---|
| Series | DuraClik 502352 |
| Type | Male Pin |
| Mounting | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.252\" (6.40mm) |
| Insulation material | Polyamide (PA), Nylon |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Parameter | Value |
|---|---|
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | Automotive, Industrial |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 9 |
| Contact finish - mating | Tin |
Its 2.00mm pitch balances routing density with reliable contact spacing for automotive and industrial signal interconnects.
The insulation material is polyamide (PA) rated UL94 V-0, meeting flame-retardancy requirements for equipment inside enclosures. The natural color aids visual inspection of solder joints.
The pitch is 2.00mm (0.079 inches), measured center-to-center on the mating interface.
Yes, it is ROHS3 compliant.
This header mates with a DuraClik 502352 series receptacle housing and corresponding crimp terminals. The specific housing and terminal part numbers depend on wire gauge and circuit count; refer to the DuraClik 502352 series ordering guide for the matching components.