6-Circuit Free-Hanging Plug Housing, 2.00 mm Pitch
The Molex 5024390600 is a 6-circuit plug housing from the CLIK-Mate 502439 series, designed for wire-to-board applications where a compact, positive-latching interconnect is needed. The 2.00 mm pitch keeps the board footprint tight while still allowing enough room for routing smaller-gauge signal or low-power wires. This is the plug side — it houses the crimp terminals and mates with the corresponding CLIK-Mate header, locking in place with the integral latch lock for vibration-resistant retention in automotive, industrial, or consumer electronics harnesses.
What You're Getting — and What You're Not
The listing explicitly states Contacts Not Included. This is a bare housing — you order the 5024390600 for the plastic body and the latch, then source the crimp terminals separately from the same CLIK-Mate 502439 terminal family. The contact termination is crimp, so you'll need the matching hand tool or semi-auto press. The housing accepts non-gendered contacts, meaning the terminal itself is hermaphroditic on the mating interface, but the housing polarizes the orientation. Color is white, which is standard for this series and helps with visual line identification on the harness board.
Mating Half and Fit
This plug housing mates with CLIK-Mate 502439 series headers — same 2.00 mm pitch, same 6-circuit count. The latch lock on the plug engages a ramp on the header shroud.