10 positions at 1.50 mm — the BOM footprint check
The 5025841070: This is a 10-position single-row receptacle from the Molex CLIK-Mate 502584 series, pitched at 1.50 mm (0.059 in) — the first number a board layout engineer checks against the PCB footprint.
Latch holder vs friction — why the lock matters
That means the receptacle has a positive retention feature that clicks into the header's locking ramp — it resists un-mating from cable tug or vibration better than a smooth-wall friction fit. The insulation height is 7.30 mm (0.287 in) — tall enough to clear the latch mechanism above the board surface. Confirm the keep-out zone on your PCB before layout. The UL94 V-0 nylon housing handles the flame rating required inside equipment.