The Molex 5034802400 is a 24-position FFC/FPC connector from the BackFlip, Easy-On 503480 FHB1 series, on a 0.50 mm pitch. It terminates flat flex cable with a right-angle surface-mount solder joint, and the flip lock actuator secures the cable without a secondary latch. Rated 0.5 A per contact at 50 V, with gold-plated phosphor bronze contacts (3.94 µin gold) and a UL94 V-0 LCP housing. The 0.30 mm FFC thickness and 1.00 mm height above board suit tight board-stacking layouts.
Pitch, positions, and locking
The flip lock and backlock actuator design holds the cable against the contacts, reducing the risk of intermittent signals in equipment that sees routine cable swaps or vibration. Gold plating on both top and bottom contacts (3.94 µin) supports the 10 mating cycles rated, which is typical for a low-profile FFC connector — enough for field-service cycles but not for frequent reconnection.