0.30 mm pitch, 11 positions — tight signal routing
The 5047541100 is an 11-position FPC connector on 0.012" (0.30mm) pitch from the Molex BackFlip, Easy-On LA75 504754 series.
0.2 A per contact — signal only, not power
Rated at 0.2 A per contact and 50 V, this connector is strictly for low-current signal paths — think sensor lines, display data, or configuration buses. The gold contact finish (3.94µin) on both top and bottom contacts handles the low-level signal without corrosion, but the 10 mating cycle limit means it is not built for repeated disconnects. Once mated, plan to leave it.
Flip Lock actuator — holds the FPC without a secondary latch
The Flip Lock, Backlock actuator (gray polyamide) secures the 0.20 mm-thick tabbed FPC. The front-flip design wipes the contact pads on insertion and locks with an audible click — no secondary retainer needed.