0.30 mm pitch — routing density trade-off
The 5047542520 is a 25-position FPC connector on 0.30 mm pitch — the tightest in the Easy-On LA75 series. That pitch forces a narrow trace fan-out on the PCB; a 0.20 mm FPC thickness is required to match the contact beam wipe. Right-angle SMT mounting keeps the mated height at 0.75 mm above the board, useful for thin-profile enclosures where the FPC exits parallel to the PCB.
Signal-only current — 0.2 A per contact
Rated at 0.2 A per contact, this connector is for low-current signal paths — display data, sensor lines, or control signals. The 50 V voltage rating and gold-plated contacts (3.94 µin gold over copper alloy) support repeated mating cycles in corrosive environments. The flip-lock actuator secures the FPC with a backlock mechanism; the actuator material is glass-filled nylon, and the housing is LCP rated UL94 V-0.