31 positions at 0.30mm pitch — tight-pitch FPC interconnect
The Molex 5047543120 is a 31-position FPC connector from the BackFlip, Easy-On LA75 504754 series, built for dense board-to-flex routing at a 0.30mm pitch. Right-angle SMT termination keeps the assembly low-profile at 0.75mm above the board — useful when z-height is tight. The flip-lock, backlock actuator secures the FPC with a positive latch; the actuator color is gray, housing is black.
0.2A signal rating — pure signal duty, no power
Rated 0.2A per contact at 50V, this connector is for low-current signal paths — think display cables, sensor interfaces, or fine-pitch logic links. Gold-plated contacts (3.94µin gold over copper alloy) handle the 10 mating cycles the spec allows; after that, the gold may wear through and contact resistance rises.
RoHS non-compliant per the listing — verify your assembly's exemption or waiver requirements before committing.
Mates with matching FPC — no separate housing
This connector accepts a 0.30mm-pitch FPC with tapered cable ends; contacts engage top and bottom of the flex. No mating housing needed — the FPC inserts directly into the flip-lock actuator. The locking feature is a flip-lock, backlock mechanism.