Skip to main content
Log in
5051101097 — Molex product photo
Molex

Molex 5051101097 Easy-On FD19 FFC/FPC Connector, 10 Pos

MPN5051101097
Active

Molex Easy-On FD19 505110, FFC/FPC connector, 10 positions, 0.50mm pitch, ZIF bottom-contact, right-angle SMT, gold-plated phosphor bronze contacts, 0.5A, 50V, UL94 V-0 LCP housing.

$1.6000Ref. price · indicative, final on quote
5051101097 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

5051101097 Technical Specifications
ParameterValue
SeriesEasy-On FD19 505110
Mounting typeSurface Mount, Right Angle
Cable end typeTabbed, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C ~ 150°C
Housing colorBeige
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Actuator materialPolyamide (PA), Nylon, Glass Filled
Height above board0.075\" (1.90mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles25
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.30mm
Positions10
Contact finish thickness1.97µin (0.050µm)

Product details

Pitch, position count, and ZIF actuation

The 5051101097: The 0.50 mm pitch sets the board footprint and the FPC width — a 10-position connector at this pitch needs a cable about 5 mm wide. The ZIF flip-lock actuator clamps the FPC after insertion; the contacts wipe the pads on the bottom side of the flex, and the lock holds without a secondary latch.

Current, voltage, and contact finish

Gold plating at 1.97 µinch over phosphor bronze gives enough corrosion resistance for indoor signal paths, but the thin flash means the mating cycle rating is 25 cycles; this connector is not built for frequent reconnect duty in a field-service harness.

Board fit and temperature range

Frequently asked questions

Is 5051101097 a Zero Insertion Force (ZIF) connector?

Yes — the flip-lock actuator opens the contacts for zero-insertion insertion of the FPC, then clamps it in place.

What is the exact pitch of Molex 5051101097?

0.50 mm (0.020"). The FPC must match this pitch and be 0.30 mm thick with a tabbed, tapered end.