Skip to main content
Log in
5051101592 — Molex product photo
Molex

Molex 5051101592 FPC Connector – 0.50 mm Pitch, 15 Pos, ZIF

MPN5051101592
Active

Molex Easy-On FD19 505110 series FPC connector, 15 positions, 0.50 mm pitch, bottom-contact, ZIF flip-lock, 0.5 A, gold-plated contacts, surface-mount right-angle, tape-and-reel packaging.

$0.8200Ref. price · indicative, final on quote
5051101592 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

5051101592 Technical Specifications
ParameterValue
SeriesEasy-On FD19 505110
Mounting typeSurface Mount, Right Angle
Cable end typeTabbed, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C ~ 105°C
Housing colorBeige
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Actuator materialPolyamide (PA), Nylon, Glass Filled
Height above board0.075\" (1.90mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
PackageTape & Reel (TR) Cut Tape (CT)
TerminationSolder
ManufacturerMolex
Mating cycles25
Contact finishGold
Locking featureFlip Lock, Backlock
FFC, FCB thickness0.30mm
Positions15
Contact finish thickness1.97µin (0.050µm)

Product details

The Molex 5051101592 is a 15-position, 0.50 mm pitch FPC connector from the Easy-On FD19 series. It uses a bottom-contact design with a ZIF flip-lock actuator — the cable inserts without force, then the black actuator flips down to clamp the FPC against the gold-plated phosphor bronze contacts. The 1.90 mm height above board keeps the connector low-profile for tight enclosures. In a product that sees one cable swap per year, the contact interface lasts the service life without fretting.

Cable Fit and Orientation Check

The bottom-contact arrangement means the cable's conductor pattern must face downward into the connector — a flipped flex shorts the wrong row, so confirm the cable orientation before insertion.

Sourced through independent distribution; no stock-holding claim is made on this page.

Frequently asked questions

What is the height above board for the 5051101592?

The mated height above the PCB is 0.075 inches (1.90 mm), which is the z-height budget needed for the connector body and the FPC exit path.

What FFC thickness does the 5051101592 support?

It accepts FFC or FPC with a thickness of 0.30 mm. The cable end must be tabbed and tapered to fit the ZIF actuator.