Skip to main content
Log in
Molex 5051102296 — FFC / FPC Cable Assemblies

Molex 5051102296 – Easy-On FD19 FFC Connector, 22 Pos, 0.5mm

MPN5051102296
Active

Molex Easy-On FD19 505110 FFC/FPC connector, 22 positions, 0.50mm pitch, right-angle SMT, ZIF flip-lock, gold-plated bottom contacts, 0.5 A per contact, -40°C to 125°C, UL94 V-0.

$1.0100Ref. price · indicative, final on quote
Molex 5051102296 datasheet (PDF)
RoHSROHS3 Compliant
SeriesEasy-On FD19 505110
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5051102296 key specifications
ParameterValue
SeriesEasy-On FD19 505110
MountingSurface Mount, Right Angle
Cable end typeTabbed, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A per Contact
Operating temperature-40°C ~ 125°C
Housing colorBeige
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled

All specifications

5051102296 additional specifications
ParameterValue
Actuator materialPolyamide (PA), Nylon, Glass Filled
Height above board0.075\" (1.90mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles25
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.30mm
Positions22
Contact finish thickness1.97µin (0.050µm)

Product details

22-position, 0.50mm-pitch ZIF for tight board layouts

The Molex 5051102296 is a 22-position FFC/FPC connector from the Easy-On FD19 505110 series, built for dense signal routing on a 0.50mm pitch. Zero Insertion Force (ZIF) actuation with a flip-lock — no insertion force on the contacts during cable insertion, which protects thin 0.30mm FFC tabs from damage.

Rated 0.5 A per contact at 50V, with gold plating at 1.97 µin on phosphor bronze contacts. The gold thickness supports up to 25 mating cycles, typical for internal signal runs where the cable is set once and rarely re-terminated. The bottom-contact design places the contact beam on the PCB side, which keeps the signal path short and reduces inductance compared to a top-contact layout at the same pitch.

Frequently asked questions

What is the difference between 5051102296 and 5051102396?

The 5051102396 is the 24-position sibling in the same Easy-On FD19 505110 series. Both share the 0.50mm pitch, ZIF flip-lock, gold plating, and right-angle SMT package.

Can 5051102296 be used with a 0.5mm pitch FFC cable?

Yes — the 0.50mm pitch matches standard 0.5mm-pitch FFC cables. The connector accepts FFC or FPC with a tabbed, tapered end and a thickness of 0.30mm.