28-position 0.50mm-pitch ZIF for signal-level FFC/FPC
The 5051102891: The ZIF flip-lock actuator accepts 0.30mm-thick FFC or FPC with tabbed, tapered ends; the bottom-contact design mates the flex pad to the gold-plated phosphor bronze beam without insertion force. Rated 0.5A per contact at 50V, this is a signal-path connector — the 25 mating cycles and 1.97µin gold flash suit moderate-duty reconnection in controlled environments.
Right-angle SMT with solder retention
The right-angle orientation places the flex parallel to the board, keeping the mated stack height at 0.075" (1.90mm) above the PCB — useful for tight z-height budgets.