3-position, 2.00 mm pitch, bottom-contact FPC connector
Gold plating on the contacts (3.94 µin) and a 0.30 mm FPC thickness spec mean the cable must match the actuator gap — a flipped flex intended for top-contact will short the wrong row.
Rated 1.5 A with 25 mating cycles — a signal-duty interconnect
The gold flash (3.94 µin) is enough for occasional reconnection in test or calibration jigs, but not for frequent field service. The 0.30 mm FPC thickness is the only supported cable — a thicker flex will damage the actuator, a thinner one may lose contact force.
Listed as Active with ROHS3 compliance. No official successor or cross-reference noted.