Molex SlimStack 505550 series receptacle, 30 positions, 0.016" (0.40mm) pitch, dual-row, surface mount, gold-plated contacts, 0.8mm mated stacking height, solder retention.
| Parameter | Value |
|---|---|
| Series | SlimStack 505550 |
| Mounting | Surface Mount |
| Connector type | Receptacle, Center Strip Contacts |
| Height above board | 0.026\" (0.65mm) |
| Mated stacking heights | 0.8mm |
| Pitch | 0.016\" (0.40mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Solder Retention |
| Contact finish | Gold |
| Rows | 2 |
| Positions | 30 |
| Contact finish thickness | 4.00µin (0.100µm) |
The 0.016" (0.40mm) pitch and 0.8mm mated stacking height let two PCBs sit close together — think smartphone-thin assemblies or compact sensor modules. Dual rows of gold-plated centre strip contacts handle signal duty; the 4.00µin gold flash is enough for the limited mating cycles typical of a factory-mated stack.
No through-hole anchors needed — the retention pads are part of the SMT footprint.
The pitch is 0.016" (0.40mm), which is the tightest in the SlimStack 505550 series and drives the PCB routing density.
The mated stacking height is 0.8mm, defining the board-to-board gap in a mezzanine stack.
Yes, it is ROHS3 compliant.
The 5055503020 is the standard 30-position receptacle in the SlimStack 505550 series.
This part is active and sourced to order against your BOM quantity.