15-position SMT header for wire-to-board in automotive and industrial assemblies
The Molex 5600201530 is a 15-position, single-row header from the DuraClik 560020 series, designed for board-to-cable/wire applications. The latch lock fastening system provides a positive mechanical retention against vibration, which is a common requirement in automotive and industrial environments where the connector is specified.
Mated stack height and board footprint
The mated stack height is 9.3 mm, which sets the z-axis clearance needed between the PCB and the mating receptacle. The 2.00 mm pitch drives the board routing density and the footprint for the SMT pads. The header is fully shrouded with a 4-wall design, which protects the male pins during handling and guides the mating receptacle into alignment.
Sourcing and lifecycle status
Sourced to order against the BOM quantity.