Skip to main content
TE Connectivity AMP Connectors 1-1337452-0

TE Connectivity 1-1337452-0 BNC Jack, 50 Ohm, 4 GHz

MPN 1-1337452-0
Active

TE Connectivity Greenpar BNC jack, 50 Ohm, 4 GHz, 500 V, panel mount bulkhead, solder cup, gold center contact, 500 mating cycles, nickel body.

$5.2800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-1337452-0 key specifications
ParameterValue
SeriesGreenpar
MountingPanel Mount
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Mounting featureBulkhead - Rear Side Nut
Operating temperature-40°C ~ 60°C
Body materialBrass
Housing colorSilver, White
Dielectric materialAcrylonitrile Butadiene Styrene (ABS)
Center contact materialBrass

All specifications

1-1337452-0 additional specifications
ParameterValue
PackageBulk
FeaturesIsolated
Includes3 pcs - 1 Connector, 1 Lockwasher, 1 Nut
Impedance50 Ohms
Body finishNickel
Mating cycles500
Insertion loss0.2dB
Number of ports1
Shield terminationSolder
Contact terminationSolder Cup
Center contact platingGold

Product details

The 1-1337452-0: It is a female socket designed for panel mounting through a bulkhead, secured from the rear with the included lockwasher and nut. The gold-plated center contact and nickel-plated brass body give it the corrosion resistance and mating cycle life — 500 cycles — that test equipment, instrumentation, and communication gear demand. The 0.2 dB insertion loss across the band tells you the signal sees very little attenuation through the interface.

Mounting and Cable Termination

This jack mounts in a panel cutout and is held by the rear-side nut — the bulkhead flange sits on the outside, the nut tightens from behind. The lockwasher in the kit keeps the nut from backing off under vibration. Termination is solder cup: you tin the centre conductor of your coax, insert it into the cup, and solder.

The 4 GHz ceiling means this jack handles frequencies up into the low microwave range; beyond that the BNC interface itself starts to mode. The -40°C to 60°C operating range covers indoor and sheltered outdoor use but not extended high-heat environments. Gold on the centre contact gives you low and stable contact resistance over the full 500 mating cycles, which matters when the connector sees regular test-bench reconnections.

MPN
1-1337452-0