Skip to main content
TE Connectivity AMP Connectors 1546216-2

TE Buchanan 1546216-2 Terminal Block, 2 Pos, 5 mm Pitch

MPN 1546216-2
Active

TE Connectivity Buchanan 1546216-2, 2-position PCB terminal block, 5.00 mm pitch, 13.5 A, 300 V, side-entry screw cage clamp, 15-17 AWG, gray, through-hole.

$0.7000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1546216-2 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current13.5 A
Wire gauge15-17 AWG
Wire terminationScrew - Rising Cage Clamp
Operating temperature-40°C ~ 105°C
ColorGray
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated

All specifications

1546216-2 additional specifications
ParameterValue
Pitch0.197\" (5.00mm)
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.68 Nm (6 Lb-In)
Number of levels1
Mating orientationHorizontal with Board
Positions per level2

Product details

What This Terminal Block Does in the Build

The TE Connectivity Buchanan 1546216-2 is a 2-position PCB-mount terminal block from the Buchanan series. It terminates solid or stranded 15-17 AWG wire into a rising cage clamp, tightened by an M3 screw to 0.68 Nm (6 Lb-In). The 5.00 mm pitch matches the hole spacing for a standard two-position power or signal termination on the board. Rated 13.5 A at 300 V, it handles a moderate load — think a 24 VDC control supply tap or a 120 VAC solenoid circuit — not a main bus. The block mounts through-hole with the wire entry oriented horizontal to the board (side entry), so the wires run parallel to the PCB surface. This keeps the assembly low-profile in an enclosure where vertical clearance is tight. The clamp and screw are brass with nickel plating; the contact surface is tin-plated brass, which is standard for a fixed-installation block where repeated re-termination is infrequent.

Wiring and Torque — What the Specs Mean on the Bench

15-17 AWG is the wire range the rising cage clamp accepts. That covers common control wiring — 16 AWG stranded is typical for panel terminations. The clamp lifts as the screw tightens, pressing the wire against the current bar. Over-torquing past 0.68 Nm can strip the M3 thread in the brass clamp or crack the PA66 housing; under-torquing leaves a high-resistance joint that heats under load. The side interlocking feature lets you snap multiple 1546216-2 blocks together into a multi-position assembly without a separate end bracket. The interlock is a dovetail on the housing side — no extra hardware needed.

MPN
1546216-2