Skip to main content
TE Connectivity AMP Connectors 5227161-7

TE Connectivity 5227161-7 BNC Jack, 50 Ohm, 4 GHz

MPN 5227161-7
Active

TE Connectivity BNC, 5227161-7, Jack, Female Socket, 1 Port, 50 Ohms, 4 GHz, Right Angle, Panel Mount, Through Hole, Solder Termination, Bulk.

$5.3900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5227161-7 key specifications
ParameterValue
MountingPanel Mount, Through Hole, Right Angle
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Mounting featureBulkhead - Front Side Nut
Operating temperature-55°C ~ 85°C
Body materialZinc
Housing colorSilver, White
Dielectric materialPolymethylpentene (PMP)
Center contact materialPhosphor Bronze
PackageBulk

All specifications

5227161-7 additional specifications
ParameterValue
FeaturesBoard Guide, Isolated
Impedance50 Ohms
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

BNC Jack, 50 Ohm, Right-Angle Panel Mount

The bayonet lock gives a quick quarter-turn mate, and the 500-cycle rating means it holds up to repeated connects in test or field-service gear. The centre contact is gold-plated phosphor bronze, with solder termination for both the centre pin and the shield. The body is nickel-plated zinc, and the dielectric is polymethylpentene (PMP). This gives flexibility in grounding schemes, particularly in RF paths where you want to control the return path.

Cable Compatibility

The 5227161-7 is a BNC jack with solder termination — it does not specify a cable group or dielectric diameter in the listed specs. For RG174 or RG58 cable, you would typically need a BNC plug with the correct crimp or clamp ferrule to match the cable diameter. This jack is intended for panel mounting and soldering the centre contact and shield directly, not for field-attach to a specific cable type. Check the cable OD and the connector's solder-cup dimensions in the product drawing before committing.

MPN
5227161-7