Skip to main content
TE Connectivity AMP Connectors 66100-9

TE 66100-9 Multimate III+ Stamped Socket Contact, 16-18 AWG

MPN 66100-9
Active

TE Connectivity Multimate III+ Stamped Socket Contact, 66100-9, 16-18 AWG, Gold 30.0µin (0.76µm), Crimp Termination, Tape & Reel.

$1.1400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

66100-9 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge16-18 AWG
Contact materialBrass
PackageTape & Reel (TR) Cut Tape (CT)
Pin or socketSocket
Contact finishGold
Contact terminationCrimp
Contact finish thickness30.0µin (0.76µm)

Product details

What is the TE 66100-9 contact used for?

It serves as the female half in a wide range of TE's power and signal connector housings — common in industrial control, automotive harnesses, and power distribution where a reliable, field-serviceable crimp connection is required.

Packaging and line feed

For automated crimping machines and reel-fed assembly lines, the TR format feeds directly into the applicator — no manual handling required. The CT option suits lower-volume builds or prototype runs where a full reel is unnecessary.

Crimp tooling and termination

As a stamped contact, the 66100-9 requires a specific crimp tool or die set matched to the Multimate III+ contact geometry and 16-18 AWG wire range. TE's application tooling (hand crimp or pneumatic) ensures the wire barrel is compressed to the correct height and the insulation support is formed without damaging the gold plating. Using the wrong tool risks an intermittent connection or wire pull-out below spec.

What is the difference between 66100-9 and 66101-9?

The 66100-9 and 66101-9 are both Multimate III+ stamped socket contacts, but they serve different wire gauge ranges. The 66100-9 is specified for 16-18 AWG, while the 66101-9 is typically used for 14-16 AWG or a larger wire range. If your harness uses 16 AWG, either may work, but the 66100-9's barrel is sized for the smaller conductor — crimping a 14 AWG wire into it would risk insufficient pull-out force. Always match the contact to the exact wire gauge on your BOM.

MPN
66100-9