Skip to main content
Amphenol 10077239-116TLF

10077239-116TLF Amphenol ICC BERGSTIK II 16-Pin Header

MPN 10077239-116TLF
Active

Amphenol ICC (FCI) BERGSTIK® II, 10077239-116TLF, 16-position, 0.100" (2.54mm) pitch, unshrouded, through-hole, male pin header, gold mating finish, 3 A, UL94 V-0.

$6.2900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesBERGSTIK® II
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

10077239-116TLF key specifications
ParameterValue
SeriesBERGSTIK® II
TypeMale Pin
MountingThrough Hole
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board

All specifications

10077239-116TLF additional specifications
ParameterValue
PackageTube
ShroudingUnshrouded
TerminationPress-Fit, Solder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions16
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.190\" (4.83mm)
Overall contact length0.608\" (15.44mm)
Contact finish - matingGold
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Board Layout Fit: Pitch, Positions, and Footprint

The 10077239-116TLF: All positions are loaded, so the BOM count matches the pin count exactly. The through-hole press-fit termination means the pins are inserted into plated holes and mechanically retained without solder — a clean, rework-friendly assembly for backplanes or high-reliability stacks. The 0.190" (4.83mm) post length gives enough tail for a typical 1.6mm board thickness plus a wave-solder step if needed.

Contact Rating and Mating Cycle Life

That gold thickness is the standard for 500+ mating cycles — in a field-service board where the connector is swapped quarterly, you get well over a century of service at the contact interface before fretting becomes a concern. The tin-plated post is the solder-side finish; the gold-on-gold mating interface is what carries the signal. Temperature range is -65°C to 130°C, covering most industrial and telecom environments without derating.

Sourced to order against your BOM quantity. Availability and current pricing confirmed at quote time.

MPN
10077239-116TLF