Skip to main content
Molex 0541020504

Molex 0541020504 SlimStack 54102, 50 Pos, 0.50mm Pitch

MPN 0541020504
Active

Molex SlimStack 54102 series receptacle, center strip contacts, 0541020504, 50 positions, 2 rows, 0.020" (0.50mm) pitch, 0.079" (2.00mm) height above board, surface mount, gold contact finish 10.0µin.

$2.3800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

0541020504 specifications
ParameterValue
SeriesSlimStack 54102
MountingSurface Mount
Connector typeReceptacle, Center Strip Contacts
Height above board0.079\" (2.00mm)
Mated stacking heights2.5mm
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
ManufacturerMolex
Contact finishGold
Rows2
Positions50
Contact finish thickness10.0µin (0.25µm)

Product details

Board-to-Board Mezzanine Connector for Tight Stack Heights

At this density, the 50-position count packs a lot of signal or low-current power lines into a small footprint, typical for LCD interconnect, camera modules, or main-to-sub PCB links in consumer gear. Gold plating at 10.0µin on the contacts gives this receptacle a solid cycle life for field-serviceable assemblies — not the hundreds of cycles a heavy-duty gold flash would, but enough for the few mate-unmate events a mezzanine joint sees in its service life. The surface-mount tails reflow onto the board pads; no through-hole solder fillets to inspect.

Stacking Height and Board Spacing

The 2.5mm mated stacking height is the single dimension that decides whether this connector fits your board gap. The receptacle itself stands 2.00mm above the board, so the matching SlimStack header must bring the total to 2.5mm when mated. If your enclosure or mezzanine standoffs call for a different gap, this is the number to check against your mechanical drawing before committing the BOM line.

MPN
0541020504