Skip to main content
TE Connectivity AMP Connectors 1546551-5

TE Connectivity 1546551-5 Buchanan Terminal Block, 5 Pos

MPN 1546551-5
Active

TE Connectivity Buchanan 1546551-5, PCB terminal block, 5 positions, 0.138" (3.50mm) pitch, 12 A, 300 V, through-hole, screw rising cage clamp, green.

$2.1600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1546551-5 specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current12 A
Wire gauge16-28 AWG
Wire terminationScrew - Rising Cage Clamp
Operating temperature-40°C ~ 110°C
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingCopper Alloy - Nickel Plated
Screw material - platingCopper Alloy - Nickel Plated
Contact material - platingCopper Alloy - Tin Plated
Pitch0.138\" (3.50mm)
PackageBulk
Number of levels1
Mating orientationHorizontal with Board
Positions per level5

Product details

5-Position PCB Terminal Block with Rising Cage Clamp

It uses a screw-driven rising cage clamp to terminate 16-28 AWG wire, with the wire entry oriented horizontally (parallel to the board). The 0.138" (3.50mm) pitch gives it a compact footprint for a 5-circuit power or signal distribution point on a PCB, while the green polyamide housing provides a visual cue often used for ground or chassis connections.

Rated Load and Wire Fit

The 16-28 AWG wire range covers solid and stranded conductors — the rising cage clamp presses the wire against the current bar without damaging fine strands. The copper alloy contacts are tin-plated, which is standard for stationary terminations where frequent reconnection isn't needed.

Board Layout and Orientation

Through-hole mounting with a horizontal wire entry means the wires run parallel to the PCB surface — useful when clearance above the board is tight. The 3.50mm pitch is a common European spacing; the 5-position block spans about 17.5 mm of board edge. No board lock or additional retention is specified — the solder joints carry the mechanical load, so the PCB footprint should include adequate pad and hole size per the manufacturer's drawing.

MPN
1546551-5