Skip to main content
TE Connectivity AMP Connectors 2106751-3

TE Connectivity 2106751-3, 3-Position IDC Connector, 18 AWG

MPN 2106751-3
Active

TE Connectivity 2106751-3, Individual Wires IDC Connector, 3 Positions, 1 Row, 0.157" (4.00 mm) Cable Pitch, 0.157" (4.00 mm) Board-Side Pitch, 18 AWG, Through Hole, Right Angle, Tin Contact Finish.

$0.8500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2106751-3 specifications
ParameterValue
MountingThrough Hole, Right Angle
Connector typeIndividual Wires
Wire gauge18 AWG
Cable pitch0.157\" (4.00mm)
Cable terminationIDC
ColorNatural
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesFeed Through
Contact finishTin
Rows1
Board-Side pitch0.157\" (4.00mm)
Positions3

Product details

Three-Position IDC Header for 18 AWG Discrete Wiring

The cable-side and board-side pitch are both 0.157" (4.00 mm), which means the footprint on the PCB matches the wire spacing, keeping the routing straightforward for a low-density interconnect. The Feed Through feature indicates the IDC slot passes the wire through the connector body, allowing the insulation to be pierced and the conductor to seat in the contact slot without a pre-strip step. The natural-colored housing is a visual identifier on the line, though color alone does not affect electrical performance.

The 4.00 mm pitch is wide enough to route 18 AWG wire comfortably between adjacent contacts, and the through-hole solder tails provide a mechanically robust joint for the wire strain that comes from cable movement. The right-angle orientation means the connector overhangs the board edge or sits in a cutout — plan for the body to extend beyond the PCB footprint by roughly the housing depth. For corrosive or high-vibration conditions, a gold-plated variant would be preferred, but the tin finish keeps per-unit cost down for fixed harness assemblies.

MPN
2106751-3