Skip to main content
TE Connectivity AMP Connectors 2213189-2

TE 2213189-2 Poke-In Receptacle, 2 Pos, 0.130" Pitch, 2 A

MPN 2213189-2
Active

TE Connectivity 2213189-2, Poke-In Wire Receptacle, 2 positions, 0.130" (3.30 mm) pitch, 2 A, 400 V, Surface Mount, Tin contacts, Solder Retention.

$1.7000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2213189-2 specifications
ParameterValue
MountingSurface Mount, Bottom Entry, Through Board
Connector typeReceptacle, Poke-In Wire
Voltage rating400V
Current rating2A
Wire gauge24-26 AWG
Operating temperature-20°C ~ 130°C
Housing colorNatural
Contact materialCopper Alloy
Housing materialThermoplastic
Pitch0.130\" (3.30mm)
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
TerminationSolder
Contact finishTin
Positions2

Product details

Poke-In Wire Receptacle — No Crimp Terminal Needed

Rated 2 A per circuit at 400 V, it handles signal-level or low-power duty where a crimp-and-insert step would add cost for a two-wire connection. The tin-plated copper alloy contacts suit moderate mating-cycle applications in indoor equipment. The SMT mounting with bottom entry and through-board option lets you route the wire on either side of the board, which helps in tight enclosures where a right-angle header would force a bend radius conflict.

2 A at 400 V — Signal-Level Power, Not Bus Duty

At 400 V the creepage distance on a 3.30 mm pitch is adequate for basic indoor insulation class II equipment. The operating range of -20°C to 130°C covers most commercial and industrial cabinet environments, though the upper end is the housing material limit, not a continuous-current rating at that temperature.

Wire Gauge Window — 24-26 AWG Only

The poke-in mechanism is designed for a narrow wire range: 24-26 AWG. A 22 AWG wire is too thick for the contact beam to close properly, and 28 AWG may not make reliable contact. Strip length and insulation diameter also matter — the housing accepts the stripped conductor only, with the insulation butting against the entry. Confirm your wire's finished diameter against the housing entry before committing the BOM line.

MPN
2213189-2