Skip to main content
TE Connectivity AMP Connectors 2227224-3

TE Connectivity 2227224-3 ZQSFP+ Receptacle, 76-Pos

MPN 2227224-3
Active

TE Connectivity ZQSFP+ receptacle with ganged 2x1 cage, 76 (38x2) positions, press-fit through-hole right-angle, gold 30.0µin contact finish, EMI shielded with light pipe, tray package.

$38.9506 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

2227224-3 specifications
ParameterValue
MountingThrough Hole, Right Angle
Connector typeReceptacle with Cage, Ganged (2x1)
PackageTray
FeaturesEMI Shielded, Light Pipe
TerminationPress-Fit
Contact finishGold
Positions76 (38 x 2)
Contact finish thickness30.0µin (0.76µm)

Product details

ZQSFP+ Ganged Cage Receptacle for 400G/QSFP28 Line Cards

It is the board-side interconnect for QSFP28 and 400G optical modules in switch and router line cards, where the press-fit termination eliminates solder and supports backplane assembly. The cage integrates EMI shielding and a light pipe for port status indication, saving separate component placement.

Press-Fit Termination and Board Mounting

Press-fit compliant-pin termination means the receptacle is pressed into plated through-holes without solder — the interference fit creates a gas-tight joint. This is standard for backplane and mid-plane assemblies where rework access is limited and solderless assembly improves reliability.

This plating grade is specified for the high mating-cycle duty of faceplate ports — field-swapped modules, test fixtures, and lab reconfiguration — where tin plating would fret and oxidise after a few hundred cycles.

Module Compatibility: ZQSFP+ vs QSFP+ and QSFP28

The ZQSFP+ connector interface is the same mechanical footprint as QSFP+ — the 76-position (38 x 2) pinout matches the MSA-defined module edge. The difference is in the cage thermal management: ZQSFP+ cages are designed for the higher power dissipation of 400G modules, with improved airflow and heat sink interfaces. A QSFP+ module will mate electrically, but the thermal design of the cage must be verified for the module's power envelope.

MPN
2227224-3