Skip to main content
TE Connectivity AMP Connectors 2351886-2

2351886-2 TE Connectivity Buchanan Header, 2 Pos, 3.50mm

MPN 2351886-2
Active

TE Connectivity AMP Connectors Buchanan series, 2351886-2, Header, Male Pins, Shrouded (4 Side), 2 positions, 0.138" (3.50mm) pitch, through hole, solder termination, tin mating finish, UL rated 12 A, 150 V.

$0.2200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2351886-2 key specifications
ParameterValue
TypeHeader, Male Pins, Shrouded (4 Side)
SeriesBuchanan
MountingThrough Hole
Voltage - UL150 V
Current - UL12 A
Operating temperature-40°C ~ 105°C
ColorGreen
Contact materialCopper Alloy
Housing materialPolyamide (PA66), Nylon 6/6
Insulation height0.362\" (9.20mm)
Material flammability ratingUL94 V-0
Pitch0.138\" (3.50mm)

All specifications

2351886-2 additional specifications
ParameterValue
PackageBulk
Number of levels1
Termination styleSolder
Header orientationVertical
Contact tail length0.134\" (3.40mm)
Positions2
Positions per level2
Contact mating finishTin

Product details

The 2351886-2: The 0.138" (3.50 mm) pitch sets the pad spacing on the PCB — standard for Buchanan terminal block headers, so the footprint matches common 3.50 mm pluggable terminal blocks like the TE 284604 series. Rated 12 A per circuit under UL conditions — the current ceiling before the temperature rise exceeds the housing material limit. At 105°C max operating, derate if the ambient inside the enclosure runs above 85°C. Tin mating finish on the pins: cost-effective for infrequent disconnect cycles. In a panel that gets mated once at install and stays, tin is fine. For quarterly reconnects in a corrosive environment, gold would be the better call.

Shrouded header — what it protects against

The 0.362" (9.20 mm) insulation height gives the shroud enough depth to guide the mating plug square-on. Vertical orientation, through-hole solder termination: the pins sit straight up from the board, so the plug mates from above. The 0.134" (3.40 mm) contact tail length is enough for a standard 1.6 mm PCB — the solder joint sits proud of the bottom pad.

The base product number 2351886 covers the series; this variant is the 2-position, vertical, tin-plated version.

MPN
2351886-2