Skip to main content
TE Connectivity AMP Connectors 5-745287-4

TE 5-745287-4 AMPLIMITE HDP-20 Stamped Pin, 30.0µin Gold

MPN 5-745287-4
Active

TE Connectivity AMPLIMITE HDP-20, Stamped Pin, 5-745287-4, Gold 30.0µin (0.76µm) contact finish, Solder Cup termination, Brass contact material, Bulk package.

$0.2400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5-745287-4 specifications
ParameterValue
TypeStamped
SeriesAMPLIMITE HDP-20
Contact materialBrass
PackageBulk
Pin or socketPin
Contact finishGold
Contact terminationSolder Cup
Contact finish thickness30.0µin (0.76µm)

Product details

It is the male (Pin) half of a solder-cup termination pair, designed for field wiring or repair of D-sub cable assemblies where you need to attach individual wires directly to the contact without a crimp tool. Gold at this thickness also resists corrosion in industrial or mildly corrosive environments better than a thin flash or tin plating. The contact is made from brass, a standard choice for stamped D-sub pins that balances conductivity with formability during the stamping process. It comes in Bulk packaging, so you are buying loose contacts for manual or semi-automated assembly — not a reel for a machine.

Solder Cup Termination — What That Means for Assembly

The solder cup termination means you tin the stripped wire end, insert it into the cup, and solder. This is the classic field-replaceable method — no special crimp die or tooling required, just a soldering iron. The 5-745287-4 mates with any standard AMPLIMITE HDP-20 D-sub receptacle housing or female connector that accepts stamped pin contacts. It is not compatible with machined-contact D-sub systems (which use a different pin diameter and retention method). If you are rebuilding a legacy D-sub cable, this is the correct pin for HDP-20 stamped-contact shells.

MPN
5-745287-4