Skip to main content
TE Connectivity AMP Connectors T4110012081-000

TE Connectivity T4110012081-000 M12 Plug, 8 Pos, IP67

MPN T4110012081-000
Active

TE Connectivity M12 A-coded plug, 8-position female socket, screw termination, IP67, shielded, gold contacts, 2A, 30V, cable range 6.00-8.00mm, T4110012081-000.

$13.6500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesM12
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

T4110012081-000 key specifications
ParameterValue
SeriesM12
MountingFree Hanging (In-Line)
Connector typePlug, Female Sockets
Fastening typeThreaded
Voltage rating30V
Current rating2A
IP ratingIP67 - Dust Tight, Waterproof
Cable opening0.236\" ~ 0.315\" (6.00mm ~ 8.00mm)
Operating temperature-40°C ~ 85°C
ColorSilver
Shell materialBrass
Insert materialPolyamide (PA), Nylon

All specifications

T4110012081-000 additional specifications
ParameterValue
Contact materialZinc Alloy
Primary materialMetal
Backshell material, platingBrass, Nickel
PackageBulk
FeaturesBackshell, Coupling Nut
ShieldingShielded
OrientationA
TerminationScrew
ApplicationsIndustrial
Shell finishNickel
Positions8
Shell size - insertM12-8
Contact finish - matingGold
Contact finish thickness - mating3.00µin (0.076µm)

Product details

The TE Connectivity T4110012081-000 is an M12 A-coded plug with 8 female socket contacts, designed for free-hanging (in-line) cable termination. It is a shielded, metal-shell connector with a threaded coupling nut and a brass backshell, finished in nickel. The plug accepts cables with an outer jacket diameter between 0.236" and 0.315" (6.00 mm to 8.00 mm), making it suitable for standard M12 sensor/actuator cables and industrial Ethernet drops. Rated IP67 when mated, it seals against dust and temporary water immersion, so it belongs on washdown stations, conveyor lines, or outdoor equipment enclosures.

Sizing the Cable Entry and Termination

The screw termination means you land each conductor under a clamp screw inside the plug body — no crimp tool required, but you do need a small screwdriver and a torque spec from the manufacturer's instruction sheet. The cable opening range of 6.00 mm to 8.00 mm is the critical fit dimension: if your cable jacket is smaller than 6.00 mm, the gland may not seal to IP67; larger than 8.00 mm and it won't enter the backshell at all. The 8 positions match an 8-wire cable, common for multi-signal sensor bundles or a combination of signal and low-power lines.

Electrical and Environmental Limits

The gold-over-nickel mating finish (3.00 µin gold) resists corrosion and maintains contact reliability over repeated mating cycles in humid or mildly corrosive factory air. The A-coding keying ensures it mates only with A-coded M12 receptacles — a B-coded or D-coded port will not accept it, which is the intended mis-mate prevention.

MPN
T4110012081-000