The 50-Position AMPMODU Mod IV Housing You Order When the BOM Says Receptacle, Not Header
It accepts standard AMPMODU female crimp sockets — the contacts are ordered separately, a detail that trips up first-time buyers who expect a pre-loaded connector. The polarizing key on the housing body prevents reversed mating — one less thing to catch during harness assembly.
Free-Hanging Crimp Housing — No PCB, No Solder
It terminates via loose crimp contacts that are inserted into the thermoplastic cavity and retained by the housing's integral latch. The housing does not include board locks, mounting flanges, or panel-mount hardware — it is designed to float in the harness, with strain relief handled by the wire bundle or an external clamp.
The 1-102387-0 mates with any standard AMPMODU Mod IV 0.100" pitch dual-row pin header (breakaway or fixed) that has 50 positions in two rows. The polarizing key on the receptacle engages with the corresponding slot on the header shroud — a header without the keyway slot will not seat fully. The crimp terminals are inserted from the rear and lock into place with an audible click.
RoHS compliant. No last-time-buy notice or successor part on record.