Skip to main content
Log in
1-102570-0 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

1-102570-0 TE AMPMODU Mod II Header, 24 Pos, Obsolete

MPN1-102570-0
Obsolete

TE Connectivity AMPMODU Mod II shrouded header, 24 positions, 2 rows, 0.100" (2.54 mm) pitch, right-angle through-hole, gold-plated mating contacts, UL94 V-0 housing.

$3.4200Ref. price · indicative, final on quote
1-102570-0 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

1-102570-0 Technical Specifications
ParameterValue
SeriesAMPMODU Mod II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Current rating3A
Operating temperature-65°C~105°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.400\" (10.16mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageTray
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions24
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin-Lead
Contact length - post0.135\" (3.43mm)
Contact finish - matingGold
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

The 1-102570-0: Rated at 3 A per contact, the current capacity suits signal-level and low-power circuits. The detent lock holds the mating connector in place under moderate vibration.

Obsolete — Sourced Through Independent Distribution

This part is marked Obsolete by the manufacturer. No official successor or direct replacement is recorded under the AMPMODU Mod II series. For builds that require this exact footprint and pinout, the only supply channel is independent distribution — quantities are lot-specific and confirmed at RFQ.

Mates with AMPMODU Mod II receptacles that accept 0.025" square posts. The detent lock engages with the mating housing latch for secure retention.

Frequently asked questions

What is the replacement for 1-102570-0?

A pin-compatible alternative within the AMPMODU Mod II family would need to match the 24-position, dual-row, 0.100" pitch, right-angle, shrouded header with gold plating — verify the footprint and mating half before substituting.

Is 1-102570-0 compatible with AMPMODU Mod II?

Yes, this connector is part of the AMPMODU Mod II series. It mates with standard AMPMODU Mod II receptacles designed for 0.025" square posts and the same 0.100" pitch.

What is the pitch and row count of 1-102570-0?

It has 2 rows with 24 positions total, all loaded.