Skip to main content
Log in
TE Connectivity AMP Connectors 1-103673-6 — Pin Headers

1-103673-6 TE Connectivity AMP Connectors Pin Header – 17

MPN1-103673-6
Active

TE Connectivity AMPMODU MTE header, 1-103673-6, 17 positions single row, 2.54mm pitch, right-angle through-hole, shrouded 4-wall, board lock, gold-plated mating contacts, rated 3A, -65°C to 105°C.

$3.6800Ref. price · indicative, final on quote
RoHSRoHS non-compliant
SeriesAMPMODU MTE
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-103673-6 key specifications
ParameterValue
SeriesAMPMODU MTE
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeLatch Holder
Current rating3A
Operating temperature-65°C ~ 105°C
Contact materialBrass
Insulation colorBlack
Insulation height0.200\" (5.08mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0

All specifications

1-103673-6 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageTube
FeaturesBoard Lock, Keying Slot
ShroudingShrouded - 4 Wall
TerminationSolder
ApplicationsAutomotive, General Purpose, Medical, Telecommunications
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions17
Contact finish - postTin-Lead
Contact length - post0.130\" (3.30mm)
Contact finish - matingGold
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

Right-angle 17-pin header with board lock for vibration resistance

The 1-103673-6: This is a 17-position, single-row, right-angle through-hole header from the AMPMODU MTE series. The 2.54mm pitch matches standard 0.100-inch grid layouts, and the shrouded 4-wall design protects the square male pins during mating and handling.

Mates with AMPMODU MTE receptacles

This header mates with AMPMODU MTE receptacle housings using the same 2.54mm pitch and latch holder fastening. Confirm the receptacle's position count and polarization match your harness design.

Frequently asked questions

Is 1-103673-6 RoHS compliant?

No. The contact finish on the post is tin-lead, so this part is RoHS non-compliant. If your assembly requires RoHS, look at the tin-plated post variants in the AMPMODU MTE series or confirm your soldering process exemption.

Can 1-103673-6 be replaced by a header without board lock?

Replacing it with a non-board-lock header risks the connector lifting off the PCB under vibration. If your application doesn't see vibration or cable pull, a standard right-angle header from the same series may fit, but check the PCB footprint for the lock slot.