Skip to main content
Log in
TE Connectivity AMP Connectors 1-1318114-4 — Connector Housings

TE Dynamic D-2100 1-1318114-4 Plug Housing, 8 Pos, 2.50mm

MPN1-1318114-4
Active

TE Connectivity Dynamic D-2100 series plug housing, 1-1318114-4, 8 positions, 2 rows, 0.098" (2.50mm) pitch, panel mount snap-in, crimp termination, black thermoplastic housing, polarizing key, -55°C to 105°C.

$1.4000Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-1318114-4 datasheet (PDF)
RoHSRoHS Compliant
SeriesDynamic D-2100
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

1-1318114-4 specifications
ParameterValue
SeriesDynamic D-2100
TypeMale Pin
MountingPanel Mount, Snap-In
Connector typePlug
Operating temperature-55°C ~ 105°C
ColorBlack
Insulation materialThermoplastic, Polyester, Glass Filled
NoteContacts Not Included
Pitch0.098\" (2.50mm)
PackageBulk
FeaturesPolarizing Key
Rows2
Contact terminationCrimp
Positions8

Product details

Panel-Mount Plug Housing for Dynamic D-2100 Harnesses

Mounting and Keying

Snap-in panel mount means this housing presses into a rectangular cutout — no hardware, no tools, just a clean retention for the harness side of the interconnect.

What Contacts Fit and What It Mates With

This plug housing is a shell — it ships empty. The buyer must source male pin crimp terminals separately, typically from the Dynamic D-2100 terminal family (e.g., TE part numbers 1-1318114-4 is the housing; the corresponding pin contacts are listed under the Dynamic series). The mating half is a Dynamic D-2100 receptacle header with female socket contacts, same 2.50mm pitch and 8-position count, panel or board mount. Confirm the header's mounting style (board-mount through-hole or SMT) against the PCB layout before ordering.

Frequently asked questions

What contacts fit the 1-1318114-4 plug housing?

The 1-1318114-4 accepts male pin crimp terminals from the Dynamic D-2100 series. Contacts are not included with the housing — order the matching pin terminal separately (TE part numbers vary by wire gauge and plating). The housing is keyed with a polarizing feature to prevent mismating.

What is the mating connector for 1-1318114-4?

The mating half is a Dynamic D-2100 receptacle header with female socket contacts, same 2.50mm pitch and 8-position, 2-row configuration. The header can be board-mount or panel-mount; confirm the mounting style against the application.

Where can I buy 1-1318114-4 available via RFQ confirmation?

This part is active and sourced to order.