Skip to main content
Log in
TE Connectivity AMP Connectors 1-1318382-3 — Pin Headers

1-1318382-3 TE Connectivity AMP Connectors Shrouded Header

MPN1-1318382-3
Active

TE Connectivity AMP Connectors 1-1318382-3, header, 16 positions, 2.20 mm pitch, 2 rows, right-angle through-hole, shrouded 4-wall, latch holder, tin contacts, 12 VDC, -30°C to 105°C, UL94 HB, tube.

$2.7300Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-1318382-3 datasheet (PDF)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1-1318382-3 key specifications
ParameterValue
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeLatch Holder
Voltage rating12VDC
Operating temperature-30°C ~ 105°C
Contact materialBrass
Insulation colorBlack
Insulation height0.610\" (15.49mm)
Insulation materialPolybutylene Terephthalate (PBT), Glass Filled
Material flammability ratingUL94 HB
StyleBoard to Cable/Wire

All specifications

1-1318382-3 additional specifications
ParameterValue
PackageTube
FeaturesMounting Flange
ShroudingShrouded - 4 Wall
TerminationSolder
ApplicationsAutomotive
Contact shapeSquare
Rows2
Pitch0.087\" (2.20mm)
Positions16
Row spacing - mating0.118\" (3.00mm)
Contact finish - postTin
Contact length - post0.157\" (4.00mm)
Contact finish - matingTin
Contact length - mating0.217\" (5.50mm)

Product details

2.20 mm pitch, 16-position, right-angle shrouded header with latch

The 1-1318382-3: This is a 16-position, 2-row header on a 2.20 mm pitch, with a 3.00 mm row spacing. The mounting flange gives you an extra mechanical anchor to the PCB. Rated at 12 VDC, it is built for automotive and low-voltage power distribution where the harness sees constant vibration and temperature swings from -30°C to 105°C.

Packaged in tube, which is typical for through-hole headers handled in low-to-medium volume assembly.

Frequently asked questions

Is 1-1318382-3 a shrouded or unshrouded header?

Fully shrouded — 4-wall shroud with a latch holder. The shroud protects the pins and the latch secures the cable-side plug.

What is the pitch of 1-1318382-3?

2.20 mm pitch between adjacent pins, with a 3.00 mm row spacing.

What is the mounting type and orientation?

Through-hole, right-angle — the header sits perpendicular to the PCB surface, with the mating face parallel to the board edge.