The 1-1337469-0: The 11 GHz frequency ceiling covers common bands like Wi-Fi (2.4/5 GHz), ISM, and cellular up to mid-band 5G; above that, the insertion loss climbs. The 0.2 dB insertion loss at 11 GHz is low enough that a single mated pair won't eat your link budget — budget for two mated pairs and a short cable run and you're still under 0.5 dB total. The 500 mating cycles are high for a threaded RF connector; the silver-plated brass centre contact and body handle the wear, but silver tarnishes over time in outdoor or industrial environments — if the connector lives in a corrosive atmosphere, consider a gold-plated variant for the mating half.
Termination is solder cup on the centre contact — strip the coax centre conductor, tin it, and solder into the cup. The shield terminates via a solder tag, which gets soldered to the cable braid or a ground lug. The kit includes the connector, nut, solder tag, and washer — four pieces, no extra hardware to source.