TE Connectivity AMP Connectors Power Key series, 1-1376384-5, Board to Cable/Wire header, 4 positions, 5.00mm pitch, shrouded - 4 wall, locking ramp, through hole, kinked pin solder termination, tin contacts, UL94 V-0, -40°C to 105°C.
| Parameter | Value |
|---|---|
| Series | Power Key |
| Type | Tab |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 300VAC |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -40°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Red |
| Insulation height | 0.555\" (14.10mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6, Glass Filled |
| Parameter | Value |
|---|---|
| Mated stacking heights | 19.4mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Kinked Pin, Solder |
| Applications | General Purpose |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.197\" (5.00mm) |
| Positions | 4 |
| Contact finish - post | Tin |
| Contact length - post | 0.138\" (3.50mm) |
| Contact finish - mating | Tin |
Compared to the 1-2232960-3, which has a 2.50mm pitch and 3 positions, this 4-position header at 5.00mm pitch offers wider contact spacing for higher voltage isolation and easier routing of heavier wire gauges.
Yes, the header uses a locking ramp fastening type for positive retention when mated with the corresponding receptacle.
The current rating varies by wire gauge, as is typical for Power Key series headers. The limiting factor is the wire size used in the mating half.