The TE Connectivity 1-1419158-4 is a 10-position, dual-row receptacle housing from the AMPMODU MTE series. The housing is free-hanging (in-line) and accepts crimp terminals — you terminate the wires first, then insert them into the housing. It's built for wire-to-board or wire-to-wire harnesses where you need a reliable, field-serviceable connection that doesn't require soldering at the connector.
What you need to order alongside it
This housing ships without contacts — the note on the line says it clearly. You'll need to source the matching female crimp terminals separately. The AMPMODU MTE series uses a standard contact that crimps onto 22-26 AWG wire; pick the plating (tin or gold) based on your mating cycle and environmental needs. For the mating half, any 0.100" pitch, 10-position dual-row pin header with square posts (typically 0.025" square) will fit. The glass-filled nylon housing handles -40°C to 100°C, so it's fine for under-hood or industrial cabinet use where temperatures stay in that range.