TE Connectivity AMPMODU header, 1-1470109-4, 14 circuits, 2.00 mm pitch dual-row, shrouded 4-wall, detent lock, through-hole solder, tin-on-tin contacts, UL94 V-0 natural PA66 housing.
| Parameter | Value |
|---|---|
| Series | AMPMODU |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 100VDC |
| Current rating | 3A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.256\" (6.50mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 14 |
| Row spacing - mating | 0.079\" (2.00mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.118\" (3.00mm) |
| Contact finish - mating | Tin |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
The 1-1470109-4: The 0.079" (2.00 mm) pitch matches the common 2 mm ribbon cable grid, so the pinout lines up with standard IDC connectors — watch pin-one every press. The detent lock provides a positive hold against vibration without a separate latch — it clicks when fully seated.
Submit a request with your target quantity and delivery window.
This is a shrouded male header. It mates with a 2.00 mm pitch receptacle — typically an AMPMODU female housing with crimp terminals or an IDC socket. The detent lock engages with a matching slot on the receptacle. Confirm the receptacle's circuit count and keying before ordering.
Yes, the fastening type is Detent Lock. It provides a positive retention that clicks when mated, resisting vibration without a separate latch.