Skip to main content
Log in
TE Connectivity AMP Connectors 1-1586041-0 — Pin Headers

1-1586041-0 TE VAL-U-LOK Header 10POS 4.2mm R/A

MPN1-1586041-0
Active

TE Connectivity VAL-U-LOK 1-1586041-0, 10-position dual-row right-angle header, 4.20mm pitch, 9 A per circuit at 600 VAC, tin-plated brass contacts, four-wall shrouded with locking ramp, through-hole solder termination, -40 to 105 °C operating, UL94 V-2 nylon housing, RoHS compliant.

$1.2200Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-1586041-0 datasheet (PDF)
RoHSRoHS Compliant
SeriesVAL-U-LOK
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1-1586041-0 key specifications
ParameterValue
SeriesVAL-U-LOK
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating600VAC
Current rating9A
Operating temperature-40°C~105°C
Contact materialBrass Alloy
Insulation colorNatural
Insulation height0.402\" (10.20mm)
Insulation materialPolyamide (PA), Nylon

All specifications

1-1586041-0 additional specifications
ParameterValue
Material flammability ratingUL94 V-2
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationSolder
ApplicationsGeneral Purpose, Industrial, Lighting
Contact shapeSquare
Rows2
Pitch0.165\" (4.20mm)
Positions10
Row spacing - mating0.165\" (4.20mm)
Contact finish - postTin
Contact length - post0.142\" (3.60mm)
Contact finish - matingTin
Contact finish thickness - post80.0µin (2.03µm)
Contact finish thickness - mating80.0µin (2.03µm)

Product details

The 1-1586041-0: With a 4.20mm pitch and 0.165" row spacing, the header occupies a compact dual-row footprint on the PCB — the 0.142" solder-tail length provides adequate through-hole standoff for wave-solder wetting on standard 1.6mm boards. The 9 A per circuit rating is specified at the connector level; in practice, the current ceiling is limited by the wire gauge and ambient temperature inside the enclosure.

This header mates with VAL-U-LOK receptacle housings that accept 20-24 AWG crimp terminals. Termination is through-hole solder — the tin-plated posts (80 µinch thickness) are compatible with both wave and hand-solder processes. The brass alloy contact material provides good conductivity and spring retention over repeated mating cycles.

Lifecycle and compliance status

RoHS compliance is confirmed per the manufacturer's declaration.

Frequently asked questions

What is the pitch of 1-1586041-0?

The mating pitch is 0.165" (4.20mm), with the same row spacing of 0.165" (4.20mm) between the two rows.