3-Position Sealed Plug Housing in the MCON Series
The 4.00mm pitch spaces the tab contacts wide enough for the 125°C operating ceiling and the sealed construction. Yellow glass-filled PBT body, locking ramp on the mating face, and a free-hanging mount — this is the housing you spec when the harness runs through a wet zone and you need the mate to stay put under vibration.
Sealed Housing for Wet Environments
The sealed feature means this housing carries a gasket or interfacial seal that keeps water and dust out of the terminal cavity when mated with the correct receptacle. It is the reason you pick this over an unsealed MCON housing for engine-bay, underbody, or pressure-wash-zone harness runs. The locking ramp engages with a positive click and resists back-out from machine vibration — no secondary clip needed.
Crimp Termination — Contacts Ordered Separately
This is standard for MCON sealed connectors: the terminal and the seal are a matched set, and the housing acts as the carrier. Order the correct MCON tab terminal separately for your wire gauge.
Temperature Range and Material
The yellow colour is a visual aid on the assembly line — it distinguishes this 3-position sealed plug from other MCON housings in the same harness bundle.