TE Connectivity AMP Connectors 1-1734248-3, FPC connector, 13 positions, 1.00 mm pitch, vertical SMT, ZIF slide lock, gold flash on phosphor bronze contacts, UL94 V-0 PA9T housing.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Cable end type | Tapered |
| Flat flex type | FPC |
| Connector (Contact type) | Contacts, Vertical - 1 Sided |
| Voltage rating | 125V |
| Current rating | 1A |
| Operating temperature | -20°C ~ 85°C |
| Housing color | Black |
| Actuator color | Black |
| Contact material | Phosphor Bronze |
| Housing material | Polyamide (PA9T), Nylon 9T |
| Actuator material | Polyamide (PA9T), Nylon 9T |
| Parameter | Value |
|---|---|
| Height above board | 0.217\" (5.50mm) |
| Material flammability rating | UL94 V-0 |
| Pitch | 0.039\" (1.00mm) |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Zero Insertion Force (ZIF) |
| Termination | Solder |
| Mating cycles | 20 |
| Contact finish | Gold |
| Locking feature | Slide Lock |
| FFC, FCB thickness | 0.30mm |
| Positions | 13 |
| Contact finish thickness | Flash |
The 1.00 mm pitch is a common footprint for dense FPC routing, but the 13-position count is non-standard — verify your BOM position count matches exactly. The connector accepts FPC thickness of 0.30 mm and uses a tapered cable end type, which is standard for many FPC cables. Gold flash on the contacts provides adequate corrosion resistance for up to 20 mating cycles, typical for consumer electronics and low-cycle field service.
Yes, it is RoHS compliant.
Yes, the connector is specified for 0.30 mm FPC thickness.