1.00 mm pitch, 15-position FPC connector with ZIF slide lock
The 1-1734248-5 is a 15-position FPC connector on a 0.039" (1.00mm) pitch, vertical SMT mount, with a Zero Insertion Force (ZIF) slide lock actuator. The gold flash contacts on phosphor bronze are rated 1 A per circuit, and the housing is black polyamide (PA9T) rated UL94 V-0. This part sits in the TE 1734248 series of vertical FPC connectors, where the 15-position variant is a common choice for low-signal-count board-to-flex interconnects in compact enclosures.
What the 1 A rating and 20 mating cycles mean for your fit
For signal-level circuits (I2C, SPI, GPIO, sensor inputs) this is well within the margin. The 20 mating cycle rating is a service-life floor: each insertion wipes the gold flash on the contact, and after 20 cycles the contact resistance may begin to drift. In a product that sees occasional field rework or calibration access, 20 cycles is adequate; for frequent flex cable swaps, consider a connector with a higher cycle rating.