TE Connectivity AMP Connectors High Performance Interconnect (HPI) series, Board to Cable/Wire, 13 Position, Single Row, 1.25mm Pitch, Surface Mount, Right Angle, Tin, Header
| Parameter | Value |
|---|---|
| Series | High Performance Interconnect (HPI) |
| Type | Male Pin |
| Mounting | Surface Mount, Right Angle |
| Connector type | Header |
| Voltage rating | 100VAC |
| Current rating | 1A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Phosphor Bronze |
| Insulation color | Natural |
| Insulation height | 0.136\" (3.46mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | Automotive, General Purpose, Industrial, Medical |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.049\" (1.25mm) |
| Positions | 13 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
A full 4-wall shroud surrounds the pins, protecting them during handling and guiding the mating receptacle into alignment — the insulation height is 0.136" (3.46 mm), so the shroud clears most low-profile cable plugs.
This is a Board to Cable/Wire header — it mates with a receptacle housing that accepts 1.25 mm pitch crimp terminals. The mating half is part of the same HPI series; confirm the circuit count and keying match your cable assembly.
The peer 1-2232960-3 is a different pitch (2.50 mm) and through-hole mounting, so it is not a direct footprint swap. No exact second-source is listed — this part is a single-vendor TE product within the HPI series.