TE Connectivity AMP Connectors HPI series, 1-1735446-2, Board to Cable/Wire header, 12 positions, single row, 0.079" (2.00 mm) pitch, shrouded - 3 wall, locking ramp, press-fit and solder termination, 3 A, 250 V, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | High Performance Interconnect (HPI) |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.239\" (6.07mm) |
| Insulation material | Thermoplastic |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 3 Wall |
| Termination | Press-Fit, Solder |
| Applications | Automotive, General Purpose, Industrial, Medical |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 12 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.132\" (3.35mm) |
The 1-1735446-2 is a 12-position, single-row header from TE's High Performance Interconnect (HPI) series.
The solder tail is 0.134" (3.40 mm) long.
Each contact is rated 3 A at 250 V. The 3 A ceiling is typical for a 2.00 mm pitch signal interconnect — enough for sensor inputs, low-power I/O, or control signals.
Yes. TE lists automotive as one of its intended applications.
The mating pitch is 0.079" (2.00 mm). This is the center-to-center spacing between adjacent pins, which determines the PCB footprint and the matching cable housing pitch.