Skip to main content
TE Connectivity AMP Connectors 1-1744426-4 — Pin Headers

1-1744426-4 TE Economy Power 2.5 Header, 14 Pos, 2.5 mm

MPN1-1744426-4
Active

TE Connectivity AMP Connectors Economy Power 2.5 header, 1-1744426-4, 14 positions, 0.098" (2.50 mm) pitch, right-angle through-hole, shrouded 4-wall, friction lock, board lock, tin-plated contacts, 4.2 A, 250 VAC, UL94 V-0.

$1.1500Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesEconomy Power 2.5
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

1-1744426-4 key specifications
ParameterValue
SeriesEconomy Power 2.5
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeFriction Lock
Voltage rating250VAC
Current rating4.2A
Operating temperature-55°C ~ 105°C
Contact materialCopper Alloy
Insulation colorWhite
Insulation height0.299\" (7.60mm)
Insulation materialPolyamide (PA), Nylon

All specifications

1-1744426-4 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Lock
ShroudingShrouded - 4 Wall
TerminationKinked Pin, Solder
ApplicationsGeneral Purpose, Industrial, Lighting
Contact shapeCircular
Rows1
Pitch0.098\" (2.50mm)
Positions14
Contact finish - postTin
Contact length - post0.126\" (3.20mm)
Contact finish - matingTin
Contact length - mating0.141\" (3.60mm)

Product details

Right-angle 14-position header with friction lock and board lock

The 1-1744426-4: This is a 14-position, single-row, right-angle header from TE's Economy Power 2.5 series, pitched at 0.098" (2.50 mm). It's shrouded on all four walls, so the receptacle can't be misaligned during mating — a common field failure when the plug is pushed on at an angle and bends a pin.

2.50 mm pitch — wider than the 2.00 mm CT series, more room per trace

That extra 0.50 mm per channel means you can run a thicker trace or fit a via between pads on a standard 1 oz copper board without necking down. The 14-position single-row layout loads all positions, so every pin is present — no blank spots to confuse a harness build.

Frequently asked questions

Is 1-1744426-4 shrouded?

Yes, it's a 4-wall shrouded header. The shroud guides the mating receptacle straight onto the pins, which prevents bent pins during assembly — a common failure point on unshrouded headers in field service.

Does 1-1744426-4 have a friction lock?

Yes, the fastening type is friction lock. It holds the mating housing in place without a secondary latch or screw, so you can unmate it by hand, but it won't vibrate loose in a typical industrial or lighting application.