Board-to-cable header with a 4-wall shroud and friction lock
The 4.2A rating is per contact at ambient temperature — derate if the connector sits near a heat source or in a sealed enclosure above 85°C. The -55°C ~ 105°C operating range covers most indoor industrial and lighting gear, but not engine-bay or outdoor direct-sun applications. The kinked pin, solder termination gives a positive stop during through-hole insertion — the kink holds the pin at the correct depth before wave solder. The 0.134" (3.40mm) post length is standard for a 1.6mm PCB; confirm your board thickness and solder fillet clearance. Glow wire compliance (per IEC 60335-1) means the polyamide housing won't sustain a flame from a hot wire — a requirement for many household appliance and lighting fixtures. The UL94 V-0 rating confirms the material self-extinguishes within 10 seconds of a flame source.